Table of Contents
Advertisement
►
Take the new board out of its packaging.
►
Make the required settings for the board.
1
►
Push the board up to its slot (1).
►
Press the board into the slot so that it engages.
►
If necessary, connect the cables.
►
Close the locking rail (2) and press on the locking mechanism in the direction of the arrow (3).
The word "PUSH" is embossed on the locking mechanism.
►
Close the casing (see "Closing the casing").
If you have installed or removed a PCI board, please check the relevant PCI slot settings in
i
the BIOS Setup. If necessary, change the settings. Further information is provided in the PCI
board documentation.
The slots 1, 3, 5 and 7 are suitable for low-profile cards with an adapter. The slots are
counted from the bottom to the top.
A26361-K666-Z120-1-7619, edition 3
3
2
System expansions
37
Advertisement
Table of Contents
