Table of Contents
Advertisement
SystemLock permissions
You can initialise a SmartCard with one of the following permissions:
System
The system starts following entry of the user PIN. You can change the user
PIN.
Setup
You can open and change the BIOS Setup and change the user PIN.
System+Setup
The system starts following entry of the user PIN. You can open and change
the BIOS Setup and change the user PIN.
Admin
The system starts following entry of the user PIN. You can change the user
PIN an the administrator PIN, unlock locked SmartCards, open and change the
BIOS Setup and generate additional SmartCards for this system.
For instructions on how to install and operate SystemLock, and how to initialise SmartCards, see the
"BIOS Setup" manual.
Operating the SmartCard reader
●
Operating the internal SmartCard reader
You can switch on the PC by inserting your SmartCard. If the SmartCard reader has been released,
the SmartCard reader indicator on the front of the PC flashes green.
●
Operating the external SmartCard reader
After the PC is switched on, you will be prompted to insert your SmartCard.
A26361-K666-Z120-1-7619, edition 3
Operation
27
Advertisement
Table of Contents
