Table of Contents
Advertisement
Removing front USB or USB audio ports
►
Open the casing (see "Opening the casing").
►
Remove the front (see "Removing the front panel").
►
Detach the USB data cable and, if present, the audio data cable from the mainboard (see the
technical manual for the mainboard).
►
Pull the cables from the floppy disk drive.
►
Press the EasyChange rails in the direction of the arrows (1).
►
Pull the floppy disk slide-in module out of the casing (2).
►
Pull the EasyChange rails off the floppy disk slide-in module.
A26361-K666-Z120-1-7619, edition 3
1
1
System expansions
61
Advertisement
Table of Contents
