System expansions
Installing a SmartCard reader
1
►
Place the carrier on the guide clips in the casing.
►
Slide the carrier in the direction of the arrow as far as it will go (1).
►
Fasten the mounting to the casing with the screws (2).
►
Connect the plug of the SmartCard data cable to the mainboard (see the technical manual for
the mainboard).
►
Attach the front panel (see "Attaching the front panel").
►
Close the casing (see "Closing the casing").
56
2
►
Slide the SmartCard reader into the supplied
mounting (1) with the component side
upwards and fix it in place with the
screws (2).
►
Connect the data cable to the SmartCard
reader.
1
A26361-K666-Z120-1-7619, edition 3
2