System expansions
►
Press the EasyChange rails into the provided holes.
►
Slide the floppy disk slide-in module into the casing (1) until it engages noticeably. Fit the data
and power supply connectors to the floppy disk drive.
►
Connect the USB cable and, if necessary, the audio cable to the corresponding connector on
the mainboard (see also the technical manual for the mainboard).
►
Attach the front panel (see "Attaching the front panel").
►
Close the casing (see "Closing the casing").
60
A26361-K666-Z120-1-7619, edition 3