Table of Contents
Advertisement
System expansions
►
Press the EasyChange rails into the provided holes.
►
Slide the floppy disk slide-in module into the casing (1) until it engages noticeably.
►
Fit the data and power supply connectors to the floppy disk drive.
►
If it is present, pull the cable of the front USB or USB-audio interface from the mainboard (see
also the technical manual for the mainboard).
►
Attach the front panel (see "Attaching the front panel").
►
Close the casing (see "Closing the casing").
i
It may be necessary to modify the entry for the drive in the BIOS Setup.
50
A26361-K666-Z120-1-7619, edition 3
Advertisement
Table of Contents
