Talking Time And Channel Display; Call Waiting Id Operation; Lcd Display Symbols And Messages - Bell Excursion 36248 Instructions Manual

2.4ghz cordless telephone all digital answering system with call waiting caller id
Table of Contents

Advertisement

TALKING TIME AND CHANNEL DISPLAY

In talk mode, the LCD Display shows the talking time. The LCD
Display as shown means 1 hour and 12 minutes and 10 seconds.
The using channel is 32.

CALL WAITING ID OPERATION

Call Waiting ID lets you know who is on call waiting while you are still using the telephone.
Before, only a tone alerts you if you have a call waiting. Now, the Excursion
also show the Caller Identification on Call Waiting (CIDCW) information using the LCD
Display.
NOTE: During conversation and the Call Waiting signal comes in, you will hear the data
signal. Before you use these features on your Excursion
subscribe to the services through your local telephone company.
When the Call Waiting signal is heard on the receiver, the LCD Display will show the name
and number just like regular Caller ID. If you wish to speak to this person press the FLASH
button.
The Call Waiting ID Records are stored, reviewed, redialed and edited the same as regular
Caller ID Records. Please refer to the CALLER ID OPERATION section for more details.
LCD DISPLAY SYMBOLS AND MESSAGE
Different messages are displayed on the LCD display to indicate the status of the Caller ID.
Screen Shown
ALL: 10 NEW: 05
DELETED!
EMPTY
DATA ERROR
LONG DISTANCE
NO CALLS
11:10 AM 10/10 CALL#03
817-456-7890
11:10 AM 10/10 CALL# 03
817-456-7890
JOHN SMITH
$
11:10 AM 10/10 CALL #03
_ _ _ _ _ _ _ _ _ _ _ _ _
BLOCKED CALL
11:10 AM 10/10 CALL# 03
_ _ _ _ _ _ _ _ _ _ _ _ _
OUT OF AREA
11:10 AM 10/10 CALL# 03
234-567-8901
NO NAME
11:10 AM 10/10 CALL# 03
®
ALL CALLS and NEW CALLS
This message lets you know how many call records and new
call records you have.
DELETED!
This confirms that the call record or records were deleted.
EMPTY
When creating speed dialing entries, this message indicates an
available memory location.
DATA ERROR
The message sent is incomplete. This message usually
indicates temporary interference or a poor signal from the
phone company. There no problem on the phone.
LONG DISTANCE
The message sent is a long distance call.
NO CALLS
There are no call records stored in memory.
NUMBER ONLY
Either name service is not available in your area or you are
subscribed to a number-only service.
TOLL MARK
The blinking $ indicates a Toll Mark. (Qualifier L)
BLOCKED CALL
The caller has purposely chosen to block his / her name and
phone numbers from appearing on the Caller ID of the
receiving party.
OUT OF AREA
The Caller Number might not be available from the caller's
area.
NO NAME
The Caller Name might not be available from the caller's area.
REPEAT CALL
1
:12
10
TALK
®
36247 can
36247 telephone, you must first
Meaning
32

Advertisement

Table of Contents
loading

Table of Contents