Table of Contents
Advertisement
To remove the headband from the headset:
1. Hold the headset with one hand and the
headband with your other hand.
2. Rotate the headset to the horizontal position
and the pull the headset until it separates from
the headband.
Before use
After you install your telephone or power returns
following a power outage and battery depletion, the
handset will prompt you to set the date and time,
and the answering system through voice guide.
Set date and time
NOTE:
• Make sure you set the date and time including the year
correctly; otherwise the answering system does not
announce the correct day of the week for your recorded
messages time stamp
1. Use the dialing keys (0-9) to enter the
month (MM), date (DD) and year (YY). Then
press SELECT.
2. Use the dialing keys (0-9) to enter the hour (HH)
and minute (MM). Then press
AM or PM.
3. Press SELECT to save.
After setting the date and time the handset will
display Voice guide to... and set up Ans sys?
alternatively.
Set answering system through voice
guide
This feature assists you to do the basic setup of the
answering system. You can follow the voice guide
to record your own announcement, set the number
of rings and the message alert tone.
1. Press SELECT to start the voice guide for
the answering
system setup. The voice prompt will announce
"Hello! This voice
guide will assist you with the basic setup of your
answering system."
2. Input the designated numbers as instructed in
the voice guide.
12
12
to choose
or
Advertisement
Table of Contents
