New Call / Message Indicator - Bell Excursion 36248 Instructions Manual

3.
Enter your 3 digits area code.
4.
If your area is not Split area, press SCAN / PRG button to save
and exit.
5.
If your area is one of the Split area, enter neighboring area code.
817 = User's area code, 913 and 412 = Neighboring area code.
6.
Press SCAN / PRG button to save and exit.
NOTE: If the number is incorrect, press DEL button and restart on step 3.
E. HOW TO SET CALLBACK NUMBER
This is the number of digits to be called back when making a call using the Call Record and
when the area code of the incoming telephone number is same as
your area code. Refer to Callback Dial Operation on page 24.
The factory setting is 7 digits.
1.
Press SCAN / PRG button.
2.
Press 4 button, or press (+) button four times. The Callback
Number is displayed.
3. Press or button to change the Callback Number. The
Callback number scrolls as 07 10
4.
Press SCAN / PRG button to save and exit.
F. HOW TO SET RINGER ON / OFF
1.
In standby mode, press SCAN / PRG button.
2.
Press 5 button, or press (-) button three times. The current mode
is displayed.
3.
Press or button to change mode.
4.
Press SCAN / PRG button to save and exit.
G. HOW TO SET TIME
NOTE: The time set is for the LCD Display time. If CALLER ID signal comes in, the time will
adjust automatically.
1.
In standby mode, press SCAN / PRG button.
2.
Press 6 button, or press (-) button two times. The current time is
displayed.
3.
Enter 2 digits hour. The position to edit is blinking.
Use button to move the cursor to the left.
4.
Enter 2 digits minute.
5.
Press 1 for AM and 2 for PM.
6.
Enter 2 digits month.
7.
Enter 2 digits day.
8.
Press SCAN / PRG button to save and exit.
H. HOW TO ADJUST THE CONTRAST OF LCD DISPLAY
1.
In standby mode, press SCAN / PRG button.
2.
Press 7 button, or press (-) button once. The current contrast is displayed.
3.
Press or button to change the contrast.
The contrast scrolls as 01
4.
Press SCAN / PRG button to save and exit.

NEW CALL / MESSAGE INDICATOR

On the base unit, NEW CALL LED indicator will flash every 1second when new call comes
in. NEW CALL LED indicator will flash every 2 second when voice mail message comes in.
On the handset, NEW CALL LED indicator will flash every 2 seconds.
No area code is registered.
07 10.
02 03 (Three steps).
817 _ _ _ _ _ _
AREA CODE
817 913 412
AREA CODE
07
CALLBACK NUMBER
1
0
CALLBACK NUMBER
RINGER ON
RINGER OFF
12:20 AM 10/20
TIME SET
02
CONTRAST