70 name & number caller-id telephone with speakerphone (25 pages)
Summary of Contents for Bell Excursion 35850
Page 1
® Excursion ® Congratulations on your selection of the 35850 model from Northwestern Bell Phones. This quality 5.8GHz digital cordless telephone with Caller ID on Call Waiting, like all ® Genuine BELL products, has been designed to give you many years of continuous service and represents the best value for your money.
IMPORTANT SERVICE INFORMATION Read this manual before attempting to setup or use this instrument. It contains important information regarding safe installation and use. Keep this manual for future reference. Also save the carton, packing and proof of purchase to simplify and accelerate any needed action. If you need assistance or service, call (800) 888-8990 between 8:00 a.m.
SAVE THESE INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following: 1. Read and understand all instructions. 2. Keep base unit at least 20cm distance apart from a person. 3.
SAVE THESE INSTRUCTIONS BATTERY SAFETY INSTRUCTIONS CAUTION: To reduce the risk of fire or injury to persons, read and follow these instructions: 1. Use only the following type and size of handset battery pack: Cordless Telephone Battery Pack DC3.6V, 850mAh, Ni-MH Battery Pack 2.
FCC NOTICE The FCC requires that you be advised of certain requirements involving the use of this telephone. 1. This telephone is Hearing Aid Compatible. 2. On the bottom of this equipment is a label that contains, among other information, a product identifier in the form US:AAAEQ##TXXXX.
TABLE OF CONTENTS IMPORTANT SERVICE INFORMATION…………..……………….…………………………..……..1 CARTON CONTENTS …………………………………………………………………………....2 IMPORTANT SAFETY INSTRUCTIONS………………………….……………………………..... 3 BATTERY SAFETY INSTRUCTIONS…………….……………………………………………....4 FCC / IC NOTICE………………………………………………………….………………………..... 5 DESCRIPTION…………………………………..………………………………………………….... 7 MOUNTING POSITION…………………………………..………………………………………..... 8 BELT CLIP INSTRUCTION………………………………………..……………………………....9 CONNECTING THE HEADSET…………………………………..……………………………....10 POWER INSTALLATION…………………….…………………………………………………....10 INITIAL SETUP……………………………….…………….……………………………………..... 11 PHONE SETUP OPEATION MENU LANGUAGE………………………………………………………………….…....11 RINGER VOLUME……………………………………………………………….………...
DESCRIPTION CONTROLS' LOCATION AND FUNCTION (Figure 1) HANDSET CONTROLS 1. LCD Display: Shows call information, phone status, prompts and Phonebook items. 2. TALK Button: Press this button to answer an incoming call, place a call or end a call. 3. INT/Format Button: Press this button to page other handset or change CID number format on screen.
BASE UNIT CONTROLS 1. 9VDC Adapter Jack: A jack located on the bottom of the base unit used for connecting the adapter to the base unit. 2. TEL LINE Jack: Accepts line cord to make connection with modular type telephone outlet.
WALL USE : A. WITH A MODULAR WALL JACK 1. Install the wall mount bracket at the position as shown in Figure 4. 2. Connect the telephone line cord to the TEL LINE jack on bottom of the base unit. 3.
CONNECTING THE HEADSET For hands free conversation, a headset (not included) is connected to the headset jack as shown in Figure 7. The handset receiver and microphone are disabled when the headset is connected. Headset Jack Headset Plug (2.5mm) (Figure 7) Press the TALK button to answer or place a call using the headset.
INITIAL SETUP Before you can use your cordless telephone, the handset must be charged for at least 12 hours. See charging instruction in the MAXIMIZING BATTERY LIFE section. PHONE SETUP OPERATION This unit contains the following special setup options: MENU LANGUAGE RINGER VOLUME RINGER TONE AREA CODE...
RINGER TONE This telephone offers 5 ringer tones for user to select. 1. Press MENU button. 2. Press DOWN button twice. 3. Press MENU button. 4. Press UP or DOWN button to select the ringer tone (1-5) you desire. 5. Press MENU button to save the setting. 6.
TONE/PULSE This telephone allows you to dial digits using the tone signaling mode or the old pulse signaling mode. 1. Press MENU button. 2. Press DOWN button 6 times. 3. Press MENU button. 4. Press UP or DOWN button to select the dial signaling mode you desire. 5.
TO RECEIVE A CALL NOTE: If you are expecting incoming calls, the handset must be programmed to RING ON mode. A. IF THE HANDSET IS ON THE BASE UNIT 1. When the phone rings, simply pick up the handset from the base cradle if the unit is set to auto-answer ON mode.
TRANSFER CALL AFTER INTERCOM 1. During a call, the user can press the INT key followed by destination handset number (1~4). 2. If destination handset user presses the INT key to answer the intercom request, intercom mode is setup and call is on hold. 3.
VIEWING THE PHONEBOOK This 20 memories Phonebook lets you stores 20 records each of 15character names and 24digits number, it is a location dependent phonebook and you can scroll through the list by arrow keys. 1. Press the MEM button. 2.
OUT OF RANGE WARNING • The handset and base unit communicate up to a certain maximum range. The distance can be affected by weather, power lines, or even other cordless telephones. • If you far away from the base unit, the handset will show "OUT OF RANGE” on the LCD display to warn you that bit error rate is too high for proper communication between the handset and the base unit.
RECEIVING NEW CALL • When you receive a new call, the call information is stored under CALLER ID List. The "NEW" segment of LCD Display will turn on if there is unread new call(s) in the caller list. • When you receive a call, the system displays the caller information sent by the telephone company, called a Call Record.
12:35AM 11/30 CALL#07 BLOCKED CALL "BLOCKED CALL" will be shown when a call is received from a blocked number. For privacy reasons, some states allow callers the option to prevent their telephone data from being displayed on the other party's Caller ID display. INCOMPLETE DATA Display shows when the Caller ID information was received partially or incorrectly.
PLACING A CALL FROM THE CALLER LIST Press the UP/DOWN button. Press the UP button or DOWN button to select the call record you wish to call back. If the number displayed is not correct (needing 7/10/11 or 8/11/12 digits), press the FORMAT button to select call number.
IMPROVING CORDLESS RECEPTION Follow these guidelines to improve cordless sound quality: • Select an area to install the 35850 where it is closest to the center of your home or office. This will improve the operating range of the unit. •...
Page 23
Range is limited • Raise or reposition the antenna on the base. • Move the base unit so that it is centrally located in your residence or office and make sure that the base unit is not located near appliances. •...
TECHNICAL INFORMATION This cordless phone uses radio frequencies to allow mobility. There are certain difficulties in using radio frequencies with a cordless telephone. While these are normal, the following could affect the operation of your system. NOISE: Electric pulse noise is present in most homes at one time or another. This noise is most intense during electrical storms.