Table of Contents
Advertisement
OTHER FEATURES
Using the Handset Finder (PAGE)
1. Press
on the base and the phone will beep.
PAGE
2. Press any key on the handset, or place the handset in the base to stop the
page/find feature.
Out-of-Range Warning
If you venture too far from the base, the handset will beep. Reverse your
direction to re-establish connection with the base or the call will be dropped.
When the base detects that the handset has been out of range for 20 continu-
ous seconds it will release the engaged line.
Channel Changing
If you are experiencing interference during a telephone call, press the
D/CHAN key. The BE-3850 will scan up to 50 channels and select the
clearest one to provide the best possible reception.
Extension In-Use
The BE-3850 is capable of detecting when another phone
that is connected to the same phone line is being used. In
this situation, the display will show "EXT IN-USE" and the
Private Call indicator will blink on the LCD screen. You will
have to wait until the line is free to make a telephone call.
If, during a conversation, the base IN USE LED begins to blink, an extension
phone has gone off-hook.
Note: If the telephone line cord is not connected to the wall jack and the
telephone base, the display will also indicate "EXT IN-USE."
If the handset is within
range, it will beep until a
key is pressed.
39
CARE AND MAINTENANCE
Your BE-3850 telephone has been designed to give years of trouble-free
service. It is a sensitive electronic instrument. To assure its longevity, please
read the following maintenance instructions.
1. Keep the BE-3850 away from heat as high temperatures can shorten the life
of the electrical components and distort or melt its plastic parts.
2. The BE-3850 should be kept free of dust and moisture. If it gets wet, wipe it
dry immediately. Liquids can contain minerals that can corrode electronic
circuits.
3. Handle your BE-3850 gently and carefully. Dropping it can cause serious
damage to circuitry, or the plastic case, which may result in malfunction.
4. Do not use any type of chemical or any abrasive powder to clean the cabinet.
Use only mild detergents on a soft, damp cloth to clean the BE-3850
telephone.
5. The BE-3850 has built-in surge protection circuits that meet or exceed FCC
requirements. However, an incident such as a lightning strike at or near the
telephone lines, could cause serious damage.
6. If the BE-3850 is installed in an area with frequent or severe electrical
storms, it is suggested that the telephone be disconnected during these
storms or that additional surge suppression equipment be added to the
installation.
7. In the case of trouble with the telephone, do not attempt to repair the
telephone yourself. It is the responsibility of users requiring service to report
the need for service to our Service Department. They will make the
necessary arrangements for repair or replacement.
8. If you should have any questions about the operation of your BE-3850
telephone, please call our Service Department at 1-800-276-5844. Or you
may contact TT Systems LLC for technical assistance via our Internet Web
site: www.ttsystems.com or e-mail: tech@ttsystems.com.
9. Please register your product online at
www.ttsystems.com/CustomerSupport/RegOnline.asp
40
Advertisement
Table of Contents
