Setting The Display Language; Setting The Area Code; Setting The Current Date And Time - Bell BE-70PS Owner’s Owner's Manual

INSTALLATION - continued

Setting the Display Language

The display will show "SET LANGUAGE" as well as "E
be flashing, confirming the current display language is set to English.
1. Press the review UP button if required until the desired language is flash-
ing, E (ENGLISH), F (FRENCH) or S (SPANISH).
2. Press the DELETE button to retain the language you have selected.
FLASHING

Setting the Area Code

The display will change to indicate "000"and "SET AREA CODE". The first
digit of the area code will be blinking.
1. Press the review UP or DOWN button as required to select the 1
area code. Press the DELETE button to shift to the next digit.
2. Press the review UP or DOWN button as required to select the 2
area code. Press the DELETE button to shift to the next digit.
3. Press the review UP button as required to select the 3
4. Once the correct area code is shown on the display, press the DELETE button
to confirm the setting.
FLASHING
Setting the Time and Date
The display will change to indicate "12:00
The "12" in the hour segment will be blinking.
FLASHING
E F S E F S
E F S E F S
SET LANGUAGE
000 000
000 000
SET AREA CODE
I2:00 I2:00 I2:00 I2:00 I/0I I/0I I/0I I/0I
PM
SET TIME/DATE
- 11 -
11
F
rd
digit of the area code.
1/01" and "SET TIME/DATE".
PM
S". The "E" will
st
digit of the
nd
digit of the