Bell Excursion 36248 Instructions Manual page 10

1. 9VAC Adapter Jack: A jack located on the rear side of the base unit used for
connecting the adapter to the base unit.
2.
TEL LINE Jack: Accepts line cord to make connection with modular type telephone
outlet.
3.
VOLUME Control: Adjusts the base unit speaker volume level.
4.
RINGS (TS / 6 / 2) Switch: Selects the number of rings before the Excursion
automatically answers the call and used to activate the Toll Saver (TS) feature.
5.
T / P (Tone / Pulse) Switch: Allows you to select the appropriate dialing service.
TONE for tone dialing or PULSE for rotary service.
6.
Charge Terminals: Used for charging handset battery.
7.
MSG PLAY / STOP Button: Press to playback the Incoming Message(s) (ICM) and
Two Way Recording(s) or to stop the current activity.
8.
ERASE Button: Press to erase a single message or all messages in order to conserve
message space in memory.
9.
MEMO Button: Press to playback the Memo message(s).
10.
ANS. ON/OFF Button: Press to activate or deactivate answer function.
11.
(Skip) Button: Press to skip to the next message during playback.
12.
OGM PLAY Button: Press to playback Outgoing Message (OGM).
13.
(Previous) Button: Press to skip to the previous message during playback.
14.
PAGE / 2-WAY REC Button: Also allows you to locate the handset when it is not on
the base or record two way conversation.
15.
NEW CALL LED Indicator: Flashes rapidly if the system has new call message(s) and
have message(s) in your voice mailbox
16.
MEMO LED Indicator: Lights up to indicate the presence of Memo message and
blinks if there are new Memo message(s).
17.
MSG LED Indicator: Lights up to indicate the presence of Incoming Message (ICM)
BASE UNIT CONTROLS
®
36248