Table of Contents
Advertisement
234-567-8901
JOHN SMITH
*
TALK
[ M ]
OUT OF RANGE
MSG WAIT ON
MSG
ALL:10 NEW:05
IMPROVING CORDLESS RECEPTION
Follow these guidelines to improve cordless sound quality:
•
Select an area to install the Excursion
home or office. This will improve the operating range of the unit.
•
®
Keep the Excursion
Frequency Interference (RFI) is sometimes generated by these appliances, which can
cause a degradation in cordless reception.
•
Keep the handset batteries charged as much as possible. Weak handset batteries can
limit the range of cordless operation.
MAXIMIZING BATTERY LIFE
Repeated use or recharge of Ni-Cd batteries without periodic full discharge results in
reduced useable charge time. When you notice the usable charge duration decreasing, fully
discharge the Ni-Cd battery and recharge as described:
DISCHARGING
1.
Unplug the telephone line cord from the Excursion
2.
Make sure that the adapter is connected.
3.
Lift the handset out of the base cradle.
4.
Press the TALK button of the handset (IN USE LED indicator should light) and start
discharging.
Once the BATT LOW LED indicator starts flashing, it means that the battery level is low. Let
it fully discharge for 12 hour. Once the Ni-Cd battery is fully discharged, you may now
charge the battery to its full capacity.
CHARGING
1.
Make sure the adapter and telephone line cord is connected to the Excursion
2.
Place the handset on the base cradle. The CHARGE LED indicator of the base unit
will light steadily.
3.
Leave the handset charging on the base for 20 hours continuously to get a maximum
charge.
®
4.
The Excursion
36248 is now ready for regular use. Discharge and charge the Ni-Cd
battery again once you notice a decrease in the useable charge time.
MAINTENANCE
Your phone should be situated away from heat sources such as radiators, heaters,
1.
stoves or any other appliance that produces heat.
2.
Use a slightly damp cloth to clean the plastic cabinet. A mild soap will help to remove
grease or oil. Never use polish, solvents, abrasives or strong detergents since these
can damage the finish.
This blinking * indicates that the Call record information
comes multiple.
TALK
The handset is ON and ready for you to dial.
[ M ] means that the volume level is medium.
OUT OF RANGE
The handset has tried to call but failed or the handset is moved
out of range from the base unit in talk mode.
MSG WAIT ON
This means that your voice mail box has a new message right
now.
MESSAGE WAITING MARK
The MSG mark means that your voice mail box has a new
message.
®
36248 where it is closest to the center of your
36248 base unit away from electrical equipment. Radio
®
36248 .
®
36248.
Advertisement
Table of Contents
