Table of Contents
Advertisement
the base cradle when the phone rings. The LCD Display will show "TALK" and the
symbol will light steadily.
2.
Start your conversation.
3.
When finished with your call, either press the TALK button or place the handset on the
base unit.
B.
IF THE HANDSET IS OUT OF THE BASE UNIT
1.
When the phone rings, press the TALK button on the handset.
2.
Start your conversation.
3.
When finished with your call, either press the TALK button or place the handset on the
base unit.
LAST NUMBER REDIAL
A.
AFTER HEARING A BUSY TONE WHEN PLACING A CALL
If you get a busy tone, press handset TALK button to hang up.
1.
Press the handset TALK button again and listen for a dial tone.
2.
3.
Press the handset RE/PA button. This will automatically redial the last telephone
number you called (Up to 31 digits).
B.
WHEN THE HANDSET IS OFF THE BASE UNIT AND IN STANDBY MODE
Press the TALK button on the handset and listen for a dial tone.
1.
2.
Press the RE/PA button. This will automatically redial the last telephone number you
called (Up to 31 digits).
STORING TELEPHONE NUMBERS INTO MEMORY DIALING DIRECTORY
In addition to your Call Records, you can store up to 20 speed dial names and telephone
numbers into memory and you can then dial any of the stored phone numbers. You can also
transfer a Call Record into the Memory Dialing Directory.
A.
STORING TELEPHONE NUMBERS INTO THE SPEED DIALING LIST
Make sure that the handset is in the standby mode.
1.
Press and release the handset MEMO button. The handset will beep once.
2.
Press the (+) or (-) button to locate an available location or enter a memory location.
3.
There are available 20 memory locations. Memory location below 10 needs a leading
zero such as 01, 02 to 09. If the memory location is available, the LCD Display shows
the memory location number and the "EMPTY" message. The flashing line or cursor
indicates that the phone is ready for data entry.
Enter the name, character by character. You can enter up to 15 characters. Locate the
4.
character on the keypads 2 through 9. Press once to enter the first character, twice for
the second character, etc. See Name Entry Table. Use
cursor back and forth through the name entry line. To create a space between
characters and words, press the
NAME ENTRY TABLE
st
Key
1
1
&
2
A
3
D
4
G
5
J
6
M
7
P
8
T
9
W
0
0
*
*
#
space
Example: JOHN 1
button twice after the last entered character.
nd
rd
2
3
(
)
B
C
E
F
H
I
K
L
N
O
Q
R
U
V
X
Y
#
button to move the
th
th
4
5
1
space
2
3
4
5
6
S
7
8
Z
9
Advertisement
Table of Contents
