Table of Contents
Advertisement
RECEIVING NEW CALL
•
When you receive a new call, the call information is stored under CALLER ID List. The
"NEW" segment of LCD Display will turn on if there is unread new call(s) in the caller list.
•
When you receive a call, the system displays the caller information sent by the telephone
company, called a Call Record. The Call Record consists of the following information.
a. The caller's name (if available)
b. The caller's telephone number
c. The time and date of a call
d. A call record number
VIEWING THE CALLER ID LIST
In Standby mode, press UP/DOWN button to enter Caller ID list. If there is new call(s), the
"new call 03" prompt will be displayed at first where "03" is indicating number of unread
Caller ID record in the caller list.
Press UP or DOWN button to scroll to the next call. The DOWN button will go through the
calls from the last call received to the first. The UP button will allow you to view the calls from
the first call received to the last.
Press BACK button to finish review.
NOTE: If no active buttons are pressed for 60 seconds, the LCD Display will automatically
return to STANDBY mode. If you press the UP/DOWN button within 60seconds after back to
Standby mode, it will resume to the previous record in the Caller list, this will ease the "slow"
user to go through the caller list without scrolling back to previous record by too many key
strokes.
Caller ID display
12:35AM
11/30
123-845-3892
JOHN SMITH
LCD Display shows name and number, time and date of the call.
12:35AM
11/30
123-845-3892
LCD Display shows number-only service.
12:35AM
11/30
UNKNOWN CALLER
"UNKNOWN CALLER" will be displayed when Caller ID information is not available. This call
was made from a telephone company that does not offer Caller ID services (including
international calls).
CALL#07
CALL#07
CALL#07
18
Advertisement
Table of Contents
