To Change Or Delete A Password; To Attach A Security Cable - HP OmniBook Sojourn User Manual

Getting Comfortable
Protecting the OmniBook

To change or delete a password

If you delete a Supervisor Password, the User Password is deleted automatically.
1. Reset the computer and press F2 during the boot process to enter the Setup
utility. Active keys are described along the bottom of the screen. (The touch
pad does not work in the Setup utility.)
2. Select the Security menu.
3. Select Set User Password (or Set Supervisor Password), then press ENTER.
4. Type the current password, then press ENTER.
5. Press ENTER at the Enter New Password prompt.
6. Press ENTER at the Confirm New Password prompt.
7. Press Continue to save changes.

To attach a security cable

Your OmniBook has a built-in connector that allows you to secure the OmniBook
with a cable. The Kensington MicroSaver lock system works with these connectors
and is available at many computer stores.
2-18