To Run Windows Setup - HP OmniBook Sojourn User Manual

Introducing the OmniBook
Getting Started

To run Windows Setup

This procedure describes how to set up the OmniBook with the factory-installed
Windows operating system.
1. Connect the OmniBook to ac power as described in the previous procedure.
2. Open the OmniBook and press the power button.
The Windows 95 Setup program starts automatically.
3. Follow the instructions as they appear on the screen.
• During setup, you will be prompted to select the correct Keyboard Layout.
Check your keyboard. Select United States 101 if you have a # symbol
above the 3 key. Select British if you have a £ (pound Sterling) symbol
above the 3 key.
• During setup, you will be prompted to accept the License Agreement and
enter the Product ID (printed on the Certificate of Authenticity on the
Microsoft Introducing Windows 95 book). You are also prompted to set up a
user account and Windows password. You can either set up the account, or
press ESC to skip this step. You can set a Windows password at any time via
Control Panel, Password.
1-10