Electrolux TC3 Service Manual page 40

Description
Communication error between
main PCB and display board
Communication inconsistency
between main PCB and display
board (incompatible versions)
Appliance configuration error
Incorrect configuration of
washing cycle
Inconsistency between
programme selector and
cycle configuration
Communication error between
main PCB – inverter
Display board configuration error  Display board faulty.
Display board touch sensor faulty  Display board faulty.
No drum position signal made
No signal from the DSP during
motor activation
Technical Support – ADL
Possible fault
 Faulty wiring.
 Control/display circuit board faulty.
 Main circuit board faulty.
 Incorrect control/display board.
 Incorrect PCB (does not correspond to the model).
 Main circuit board faulty.
 Incorrect configuration data.
 Main circuit board faulty.
 Incorrect configuration data.
 Main circuit board faulty.
 Incorrect configuration data.
 Incompatibility between main PCB and inverter.
 DSP sensor faulty.
 Transmission belt broken.
 Main circuit board faulty.
 Faulty wiring.
 DSP sensor faulty.
 Transmission belt broken.
 Main circuit board faulty.
 Faulty wiring.
Cycle blocked
Cycle blocked
Cycle blocked
Cycle blocked
Cycle blocked
Drum positioning cycle cancelled
Cycle paused
40/43
Action
Machine status
----------------
----------------
----------------
599 75 85-45 Rev. 00
Reset
RESET
ON/OFF
ON/OFF
ON/OFF
RESET
ON/OFF
START
ON/OFF
RESET
ON/OFF
START/RESET
START
RESET