Electrolux TC3 Service Manual page 33

Easy-iron
In COTTON programmes:
adds three rinse cycles
-
eliminates intermediate spin cycles
-
- performs a pulse spin phase before the final spin
adds an "untangling" phase after the spin cycle
-
In SYNTHETIC FABRICS programmes:
it reduces the heating temperature in 50/60°C cycles to 40°C
-
increases the wash time
-
prolongs the cooling phase at the end of the wash phase
-
- adds one rinse cycle
adds an "untangling" phase after the pulse spin cycle
-
Hot & Cold Water (only for TC3 styling with pre-set connection)
Touch this sensor to select.
Technical Support – ADL
33/43 599 75 85-45 Rev. 00