Electrolux TC3 Service Manual page 12

Washing machines with electronic control system
Hide thumbs Also See for TC3:
Table of Contents

Advertisement

LCD
The information described below also appears on the LCD:
Washing Machine
The three icons shown have the following meanings, respectively:
Wash
Rinse
Spin
They are lit during the setting phase to display which phases are
included in the programme.
During the programme the icon for the phase in progress flashes,
and when the phase has ended it remains lit continuously. The
same applies when the machine is in pause during the cycle.
Padlock:
The icon lights up when the "child lock" is on.
To indicate that all the sensors are disabled to prevent children from
modifying, starting or pausing the cycle. Touch any sensor or turn
the selector dial during its activation and the icon will flash.
A sensor combination needs to be pressed to activate/deactivate it.
It may be silk-screen printed on the control panel or described in the
instruction manual.
Door closed sensor:
Lights up when the safety device stops door opening and switches
off when the door can be opened.
Flashes when the device is about to unlock the door (with door
interlock with PTC, which needs one/two minutes to open).
Washing programme time:
This appears after a washing programme has been selected. This
time corresponds to the time required for the maximum wash load
for each type of programme.
After the programme has started, the time decreases (and is
updated) minute by minute.
Delayed Start:
Selected on the related sensor. After the START/PAUSE sensor is
touched, the countdown starts and the delay time decreases hour
by hour, from a minimum delay of 2 hours to a maximum of 20 hours
( 30'  60'  90'  2hrs  3hrs...  20h  0h).
During the last 2 hours, it decreases by 30 min. at a time.
During the delayed start, the LED beside the silk-screen printed
symbol on the front panel
Selection incorrect:
Displays the flashing message "Err", for one second.
Appears on selecting option that is incompatible with the programme
selected, or when the selector is turned while a cycle is running.
Technical Support – ADL
remains permanently lit.
12/43
599 75 85-45 Rev. 00

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Tc2Tc1

Table of Contents