Table of Contents
Advertisement
Figure 52 Removing the cable management brackets from the A10508-V
(1) Loosen the screws that attach the cable
management brackets to the chassis
Repackaging the switch chassis
To repackage the switch chassis:
As shown in
1.
brackets on the pallet base of the wooden carton.
Attach the screws shipped with your switch to the chassis through the L-type brackets.
2.
Figure
55, align the screw holes on the two sides of the chassis bottom to the L-type
(2) Remove the cable management brackets
90
Advertisement
Table of Contents
Troubleshooting
