Installing The Switch; Confirming Installation Preparations - HP A10500 Series Installation Manual

Installing the switch

Figure 1 Hardware installation flow
Table 6 Description of the installation flow
Step
Confirming installation
preparations
Installing slide rails
and cage nuts on the
rack
Installing slide rails
and cage nuts on the
rack
Mounting the switch to
the rack
Grounding the switch

Confirming installation preparations

Before installing the switch:
You have read the chapter
•
the requirements.
A 19-inch rack is ready for use. For how to install a rack, see the rack installation guide.
•
Remarks
Preparations before installation
• For how to install slide rails, see
• For how to install cage nuts, see
For how to mount brackets and cable management brackets, see
mounting brackets and cable management
N/A
N/A
"Preparing for installation"
4
"Installing slide rails."
"Installing cage nuts."
brackets."
carefully and the installation site meets all
"Installing