Table of Contents
Advertisement
Check that you can manage all member switches as if they were one node.
4.
Display the running status of the IRF fabric by using the commands in
5.
Table 8 Display and maintain IRF configuration and running status
To do ...
Display information about the IRF fabric
Display topology information about the IRF fabric
NOTE:
An IRF link failure can cause an IRF fabric to split into two IRF fabrics operating with the same Layer
•
3 configurations, such as the same IP address.
To avoid IP address collision and network problems, configure at least one MAD mechanism to detect
•
the presence of multiple identical IRF fabrics and handle collisions. For more information about MAD
HP A10500 Switch Series IRF Configuration Guide.
detection, see
Use the command...
display irf
display irf topology
26
Table
8.
Advertisement
Table of Contents
Troubleshooting
