Table of Contents
Advertisement
Figure 4 Installing a cage nut
Align the installation holes on the front end of the slide rail with the cage nuts on the front rack
4.
post, and attach them with screws, as shown in
Figure 5 Attaching the slide rail to the cage nuts with screws
Keep the slide rail horizontally and adjust its length until the installation holes on the rear end of the
5.
slide rail touch the cage nuts on the rear rack post. Then attach them with screws.
TIP:
Attach all installation holes of the slide rail with screws to ensure its weight bearing capacity.
Repeat steps
4
and
6.
height so that the device can be placed on them horizontally.
5
to install the other slide rail. Make sure the two slide rails are at the same
7
Figure
7.
Advertisement
Table of Contents
Troubleshooting
