Table of Contents
Advertisement
Appendix B FRUs and compatibility matrixes
MPUs
The MPU is the core of the control management plane for the switch. The switch supports the MPU
LSU1SUPA0.
Table 27 LSU1SUPA0 supervisor engine specifications
Item
Interfaces
Interface transmission
rate
Cables and max
transmission distance
MPUs are ordered separately. A switch requires one MPU to operate normally. You can also install two
MPUs in a switch for redundancy.
LPUs
The LPUs in
Table 28
Table 28 LPU specifications
LPU model
LSU1TGS1
6SC0
LSU1SUPA0 supervisor engine
•
One console port for local or remote dialup configuration management
•
One 10/100/1000BASE-T interface for management and upgrade
•
Console port: no greater than 115200 bps and defaults to 9600 bps
•
10/100/1000BASE-T interface: 10/100/1000 Mbps, half/full duplex
•
Console port: 15 m (49.21 ft) over common asynchronous serial interface
cable
•
10/100/1000BASE-T interface: 100 m (328.08 ft) over Category-5 twisted
pairs
apply to all the switches in this series.
Description
Connector
16-port 10-
Gigabit SFP+
LC
optical Ethernet
interface card
Number
Interface
of
transmission rate
interfaces
16
10 Gbps, 1 Gbps
60
Available
transceiver
modules
•
10-Gigabit SFP+
module
•
10-Gigabit SFP+
cable
•
Gigabit SFP
module
Advertisement
Table of Contents
Troubleshooting
