Tools And Equipment - HP A10500 Series Installation Manual

Hide thumbs Also See for A10500 Series:
Table of Contents

Advertisement

Tools and equipment

Table 5
lists the tools and equipment that you might use during installation, and all of them are user
supplied.
Table 5 Tools and equipment list
Category
Measuring and
marking tools
Drills
Fastening tools
Small tools
Auxiliary tools
Tools for fiber-
optic cleaning
Equipment
Tool
Long tape, ruler (of 1 meter, or 3.28 ft), gradienter, marker, chalk line, and pencil
Percussion drill, electric drill, and several auxiliary drill bits
Flat-blade screwdriver P4-75 mm
Phillips screwdriver P1-100 mm, P2-150 mm, and P3-250 mm
Socket wrench M5
Socket wrench M6
Needle-nose pliers, diagonal pliers, combination pliers, wire-stripping pliers, crimping
pliers, RJ-45 crimping pliers, file, and handsaw
ESD-preventive wrist strap, hair brush, tweezers, paper knife, hand bellows, electric iron,
solder wire, ladder, cable stripper, vacuum cleaner, crowbar, and rubber hammer
Lint-free paper and optical fiber microscope
Multimeter, 500 V Megohmmeter for measuring the insulation resistance, error detector,
optical power meter, and earth resistance tester
3

Advertisement

Table of Contents
loading

Table of Contents