Configuring Kvm Sessions; Configuring Local Virtual Media Sessions - Dell Remote Console Switch User Manual

6 In the Preemption Timeout field, enter the amount of time (from 1 to 120
seconds) that a prompt will be displayed to inform you that your session is
going to be preempted.
7 Select the applicable session sharing options (Enabled, Automatic,
Exclusive, or Stealth).
8 Select the Input Control Timeout from 1 to 50, with 1 representing one
tenth of a second.
9 Click Save.

Configuring KVM Sessions

To configure KVM session settings:
1 From the side navigation bar, select Sessions - KVM. The KVM Session
Settings screen appears.
2 Select an encryption level for keyboard and mouse signals (128-bit SSL
(ARCFOUR), DES, 3DES, or AES) and for video signals (128-bit SSL
(ARCFOUR), DES, 3DES, AES, or None).
3 Select a language from the Keyboard drop-down menu.
4 If your hardware includes the USB2+CAC SIP, select the video resolution.
5 Click Save.

Configuring Local Virtual Media Sessions

To set virtual media options:
1 From the side navigation bar, select Sessions - Virtual Media to open the
Virtual Media Session Settings screen.
2 Either enable or disable the Virtual Media locked to KVM Sessions
checkbox.
3 Either enable or disable the Allow Reserved Sessions checkbox.
4 Select one of the following options from the Virtual Media Access Mode
from the drop-down menu: Read-Only or Read-Write.
Local and Remote Configuration
xxx | xxx
73