Dell Remote Console Switch User Manual page 121

The Network sub-category allows the entry and maintenance of up to three DNS
Servers. These DNS servers are used to resolve DNS names provided on the
LDAP authentication panel.
NOTE: At least one DNS server must be configured for the LDAP feature to
work. Whenever a primary server is unavailable, the RCS software will
automatically failover to backup DNS servers, as identified here.
NOTE: You can also set DNS server addresses using the RCS's serial
administrative interface. For information about using the serial administrative
interface, please consult your RCS documentation.
To configure the DNS settings in the on-board web interface:
1 Click DNS to open the DNS Settings screen.
2 Specify the DNS mode, enter the Server addresses, and click Save.
Figure 5.1: OBWI - DNS Settings
LDAP Feature for the RCS
xxx | xxx
111