Dell Remote Console Switch User Manual page 37

Hide thumbs Also See for Remote Console Switch:
Table of Contents

Advertisement

Number
Description
3
Modem
Telephone
4
network
5
Network
6
Digital user
To connect and turn on your switch:
CAUTION:
To reduce the risk of electric shock or damage to your equipment, do not
disable the jumper cord grounding plug. The grounding plug is an important safety
feature. Plug the jumper cord into a grounded (earthed) outlet that is easily accessible
at all times. Disconnect the power from the unit by unplugging the jumper cord from
either the power source or the unit.
NOTE: If the building has 3-phase AV power, ensure that the computer and
monitor are on the same phase to avoid potential phase-related video and/or
keyboard problems.
NOTE: The maximum supported cable length from switch to device is 30
meters.
Do not disable the power grounding plug. The grounding plug is an
important safety feature.
Connect the jumper cord into a grounded (earthed) outlet that is easily
accessible at all times.
Disconnect the power from the product by unplugging the jumper cord
from either the power source or the product.
The AC inlet is the main disconnect for removing power to this
product. For products that have more than one AC inlet, to remove
power completely, all AC line cords must be disconnected.
Number Description
9
SIPs
10
Target devices
RCS (32-port model
11
shown)
xxx
|
Installation
xxx
27

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents