Window Size; Adjusting The View - Dell Remote Console Switch User Manual

To enable, disable, or configure the session time-out:
1 In the side menu, select Unit View - RCS - RCS Settings - Sessions -
General.
2 Select the desired setting for the Enable Activity Timeout box.
3 If necessary, select the time limit for the inactivity time-out.
4 Click Save.

Window Size

NOTE: The View - Scaling command is not available if the Video Viewer
window is in Full Screen mode or to non-primary users of a shared session.
When the switch OBWI is used for the first time, any open Video Viewer
windows display at a resolution of 1024 x 768 until the user changes the value.
Each Video Viewer window can be set to a different resolution.
The switch OBWI automatically adjusts the display if the window size changes
during a session as long as autoscaling is enabled. If the target device resolution
changes any time during a session, the display adjusts automatically.
To change the Video Viewer window resolution:
1 Select the View - Scaling command.
2 Select the desired resolution.

Adjusting the View

Using menus or task buttons in the Video Viewer window, you can do the
following:
• Align the mouse cursors.
• Refresh the screen.
The Video Viewer Window
xxx | xxx
85