Getting Started - Dell Remote Console Switch User Manual

8 If the local user adds, deletes, or renames any SIPs after you have loaded this
file, you can resynchronize your local switch by selecting the RCS and
clicking Resync. To control a connected server, select it in the Explorer and
click the Connect Video task button to launch a server session in the
Viewer.
9 Adjust the resolution (select View - Scaling) and quality (select View -
Color) of the server video in the Viewer.

Getting Started

The following items are supplied with the Remote Console Switch. Before
installing your RCS, locate the necessary items for proper installation.
• Remote Console Switch
• Jumper Cord(s)
• 0U Mounting Bracket
• 1U Mounting Bracket Hardware Kit (two additional rails that are pre-
mounted to the RCS are included in the kit assembly)
• Cable and Adaptors for SETUP and MODEM
• Remote Console Switch System User's Guide on CD
• Dell Safety Sheet
• Dell RTF Regulatory Tech Bulletin
Additional Items Needed:
• One Dell SIP or Avocent IQ module per attached device
• One CAT 5 patch cable per attached device (up to 45 meters)
Optional Items:
• V.34, V.90, Or V.92-compatible Modem and cables
• Power Control Device(s)
• Port Expansion Module (PEM)
xxx |
Installation
xxx
15