Cabling Installation, Maintenance, And Safety Tips - Dell Remote Console Switch User Manual

installations utilizing UTP cable specifications. The RCS system supports either
of these wiring standards. The following table describes the standards for each
pin.
Table E.1: UTP wiring standards
Pin EIA/TIA 568A
1 white/green
2 green
3 white/orange
4 blue
5 white/blue
6 orange
7 white/brown
8 brown
Cabling Installation, Maintenance, and
Safety Tips
The following is a list of important safety considerations that should be
reviewed prior to installing or maintaining your cables:
• Keep all UTP runs to a maximum of 30 feet each.
• Maintain the twists of the pairs all the way to the point of termination, or
no more than one-half inch untwisted. Do not skin off more than one inch
of the jacket while terminating.
Appendix E: UTP Cabling
EIA/TIA 568B
white/orange
orange
white/green
blue
white/blue
green
white/brown
brown
xxx | xxx
168