Dell Remote Console Switch User Manual page 85

Setting
Session
Settings: Allow
Reserved
Sessions
Drive Mappings:
Virtual Media
Access Mode
Encryption Level
Description
Ensures that a virtual media connection can only
be accessed with your username and that no
other user can create a KVM connection to that
target device. When the associated KVM session
is disconnected, the virtual media session may
be disconnected according to the Locked setting
in the Virtual Media dialog box.
You may set the access mode for mapped drives
to read-only or read-write. When the access
mode is read-only, the user will not be able to
write data to the mapped drive on the client
server. When the access mode is read-write, the
user will be able to read and write data from/to
the mapped drive. If the mapped drive is read-
only by design (for example, a CD-ROM drive,
DVD-ROM drive or ISO images), the configured
read-write access mode will be ignored. Setting
the read-only mode can be helpful when a read-
write drive such as a mass storage device or a
USB removable media is mapped, and you wish
to prevent the user from writing data to it.
You can have one DVD drive and one mass
storage device mapped concurrently. A CD drive,
DVD drive, or ISO disk image file is mapped as a
virtual CD/DVD drive.
You may configure encryption levels for virtual
media sessions. The choices are: None (default),
128-bit SSL (ARCFOUR), DES, 3DES, and AES.
Local and Remote Configuration
xxx | xxx
75