Dell Remote Console Switch User Manual page 77

target, the new SIP inherits the access control from that target. When a target
device is renamed, all the SIPs and outlets of that target are renamed, and they
carry forward the access control previously configured for the old target name.
Renaming of a Target Device
On the Target List - Overview page, the name for that target may be changed to
any unique target name. The name must be unique for the set of all targets,
including SIPs and power outlets. When a target is renamed, all outlets linked to
that target are also given the new target name.
Prioritized Status of Target Devices
On the Target List page, a target with linked power outlets controls multiple
devices. The Status value displayed for a target is chosen as the highest priority
of all the status values of the devices. The following table shows the possible
status values in priority order (highest to lowest) and the applicable target
device types.
Table 3.4: Target Status Values
Status Value
In Use
Path Blocked
Upgrading
Turning On
Turning Off
Applicable for:
Power
SIP
Outlet
x N/A
x N/A
x N/A
N/A x
N/A x
Local and Remote Configuration
Status Description
A session is active
Path to Target is in use by
another session
SIP is being upgraded
One or more outlets are turning
on
One or more outlets are turning
off
xxx | xxx
67