Configure The Override Admin Account; Configuring Dns Settings - Dell Remote Console Switch User Manual

2 Configure DNS Settings
3 Set the Network Time Protocol
4 Configure the Authentication Parameters
5 Configure Group Objects
6 Create and Download the CA Root certificate
7 Set the Login Timeout

Configure the Override Admin Account

Should a network failure occur, an account is provided that may be used
regardless of the unit's ability to authenticate against an LDAP server. Before
configuring other settings, this account should be configured. To configure the
Override Admin Account in the on-board web interface:
1 Click User Accounts, then click Override Admin.
2 Type the username and password you wish to assign to the user and then
verify the password by typing it in the Verify Password field.
3 Click Save.
NOTE: You must be logged in as admin for this option.

Configuring DNS Settings

Before the LDAP client can resolve names, at least one DNS server must be
specified.
The Network sub-category displays the name of the RCS and allows you to
change the network settings including the IP address, Subnet Mask, Gateway,
LAN speed and DHCP/BootP setting. The name displayed for the RCS will be
the same as the name given in the System Name field in the SNMP category.
xxx |
110 LDAP Feature for the RCS
xxx