Configuring Personal Wireless Lans - Cisco Aironet 600 Series Configuration Manual

Chapter 3 Configuring the Access Point

Configuring Personal Wireless LANs

Access the 600 Series OfficeExtend access point GUI as described in
Step 1
page
Click the Configuration tab.
Step 2
The Configuration–System page is displayed.
Click the SSID tab.
Step 3
The Configuration–SSID page is displayed.
Step 4 From the Band Selection drop-down list, choose the band, which can be either 2.4 GHz or 5.0 GHz. You
can duplicate the configuration on both bands, or have different settings on each band.
Step 5 Check the Enabled check box to enable this wireless connection. By default it is disabled.
Step 6 Check the Broadcast check box to broadcast the SSID over the air. By default it is unchecked.
Step 7 In the SSID field, enter the personal SSID that you want to assign to this access point. This SSID will
be locally switched. The default SSID is AIR-602 for both radios.
Note
From the Security drop-down boxes, enter the authentication type, encryption type, and passphrase. It is
Step 8
suggested that you select WPA2-PSK and AES encryption.
Click Apply to commit your changes.
Step 9
A verification screen that is similar to the following, is displayed.
Step 10 Click Continue.
OL-29882-03
2-1.
Your personal SSID Wireless LAN and your company SSID Wireless LAN are different. When
you configure your personal Wireless LAN, use an SSID name that is different from your
company's SSID to help avoid confusion.
Cisco Aironet 600 Series OfficeExtend Access Point User Guide
Configuring Personal Wireless LANs
"Accessing the GUI" section on
3-3