Configuring A Personal Ssid On A Cisco Aironet 600 Series Officeextend Access Point - Cisco AIR-OEAP602I-E-K9 User Manual

R E V I E W D R A F T — C I S C O C O N F I D E N T I A L
Configuring a Personal SSID on a Cisco Aironet 600 Series
OfficeExtend Access Point
Follow these steps to log into the GUI of the 600 Series OfficeExtend access point and configure a
personal SSID:
Obtain the IP address of your 600 Series OfficeExtend access point from your company's IT
Step 1
professional.
Note
With the 600 Series OfficeExtend access point connected to your home router, enter the IP address of
Step 2
the 600 Series OfficeExtend access point in the Address field of your Internet browser
(http:://<ap-ipaddress>) and click Go.
Note
When prompted, enter the username and password to log into the access point.
Step 3
Note
On the 600 Series OfficeExtend Access Point Welcome page, click Enter. The 600 Series Office Extend
Step 4
Access Point Home page appears (see

Configuring a Personal SSID on a Cisco Aironet 600 Series OfficeExtend Access Point

The default IP address is 10.0.0.1.
Make sure you are not connected to your company's network using a virtual private network
(VPN) connection.
The default username and password are admin and admin.
Figure 1).
Cisco Aironet 600 Series OfficeExtend Access Point User Guide
5