Specifications And Warnings - Chamberlain THE ROBO SLIDE Instruction Manual

All "Pinch Points" MUST
Gate Speed
Maximum Gate Length
Maximum Gate Weight
Maximum Cycles
AC Power Supply
AC Power Supply Wire
DC Power Supply
Solar Power
S P E C I F I C A T I O N S A N D W A R N I N G S
have protective safety devices.
Sensor Edges
Non-Pinch
Rollers
Recommended Gate Setup Configuration
S P E C I F I C A T I O N S
– 11 inch per second
– 20 feet
– 800 pounds
– 70 cycles per day with Chamberlain Elite's Plug-In Transformer.
– Solar power cycles per day varies, Contact Chamberlain for more Information
– Battery back-up cycles (50 cycles total)
– 25 VDC 1.6 Amp Plug-In Transformer (Part #
– 14 gauge or greater landscape lighting cable rated for direct burial and 300 watts at
maximum length of 1000 ft.
– Built-in, back-up for AC or Solar power failure only
– Optional (Part # SOLAR
3" Max. Width
Warning Placards
Permanently Mounted
on Both Sides
of Gate
A POW-1)
3)
2
Sensor
(2"x 2" Screen)
Edges
Weld Physical Stops on
Both Ends of Gate Rail
Non-Pinch
Rollers