Optional Edge Sensor Wiring - Optional - Chamberlain THE ROBO SLIDE Instruction Manual

O P T I O N A L E D G E S E N S O R W I R I N G
To prevent SERIOUS INJURY or DEATH from a moving gate:
• Locate entrapment protection devices to protect in BOTH the open and close gate cycles.
• Locate entrapment protection devices to protect between moving gate and RIGID objects, such as posts or walls.
NOTE: When touched, these electrically activated edge sensors immediately signal the gate operator to stop and reverse. Property
owners are obligated to test edges monthly. See page 37 for edge sensor part numbers.
DC DC
–
POWER INPUT
25 VDC
Contact your local dealer
for more information.
®
P/N Q412 P/N Q412
® ROBO SURGE SUPPRESSOR
PATENT PENDING PATENT PENDING
ACCESS SYSTEMS INC ACCESS SYSTEMS INC ACCESS SYSTEMS INC
– – 7 8 9 10 11
1 4 5 6
– –
SAFETY SAFETY EXIT EXIT FIRE DEPT FIRE DEPT STRIKE OPEN STRIKE OPEN
LOOP LOOP LOOP LOOP KEY SWITCH KEY SWITCH PUSH BUTTON PUSH BUTTON
1 4
WARNING
12 13
+ +
CLASS 2 CLASS 2
SUPPLY SUPPLY
RADIO RADIO
RECEIVER RECEIVER
• Never Paint Sensing Edge
• Never Pull On Wires
• Never Cut or Puncture Edge
• Never Operate Unguarded Equipment
Miller Edge Models:
18
MGR20 or MGS20