Wireless Antennas/ Lcd Harness; Wireless Antennas - Toshiba QOSMIO F10 Maintenance Manual

4 Replacement Procedures
4.24

Wireless antennas/ LCD harness

4.24.1 Wireless antennas

Removing the wireless antennas
The following describes the procedure for removing the wireless antennas (See Figure 4-44
and 4-44).
1. Make sure the wireless LAN antenna cables are pulled on the middle frame. (Refer to
4.8 Display assembly.)
2. Turn up the insulators and pull out the bluetooth antenna cable from the guide of
middle frame.
Insulator
Bluetooth antenna cable
Figure 4-43
QOSMIO F10 Maintenance Manual (960-498)
4.24 Wireless antennas/ LCD harness
Removing the bluetooth antenna cables
Wireless LAN antenna cables
Insulators
4-63