Toshiba QOSMIO F10 Maintenance Manual page 224

3.31 SETUP
11. Peripheral
Use this option to select the peripheral's mode.
(a) Internal Pointing Device
This option enables or disables the touch pad
Enabled
Disabled
(b) Hard Disk Mode
Use this option to select the hard disk mode.
Enhanced IDE (normal)
Standard IDE Select this mode when using an OS which does not support the
NOTE: Formats for Enhanced IDE and Standard IDE are different, so if you change the
setting, you will have to reformat the hard disk for the appropriate setting.
12. LEGACY EMULATION
(a) USB KB/Mouse Legacy Emulation
This option sets the Legacy support condition of the USB keyboard and the USB
mouse.
Enabled
Disabled
(b) USB-FDD Legacy Emulation
This option sets the Legacy support condition of the USB floppy disk drive.
When a computer is FDD built-in model, this option is not displayed.
Enabled
Disabled
3-104
Enables the touch pad. (Default)
Disables the touch pad.
Select this mode when the HDD is used for MS-DOS? ,
Windows 95/98/2000/XP, or OS/2? .
Enhanced IDE. When this mode is selected, up to 528MB is
logically available and the rest of the capacity is not usable.
Enables support. (Default)
LEGACY
USB keyboard/USB mouse are available without the driver.
Disables LEGACY support
Enables support. (Default)
LEGACY
USB floppy disk is available without the driver.
Disables LEGACY support
3 Tests and Diagnostics
QOSMIO F10 Maintenance Manual (960-498)
(Default)