Toshiba QOSMIO F10 Maintenance Manual page 301

4 Replacement Procedures
Installing the Hinge
The following describes the procedure for installing the hinge (See Figure 4-47 to 4-49).
1. Install the hinges (middle frame side) on the back side of the middle frame and
secure them with the following screws .
?
2. Install the hinges (display cover side) and secure them with the following screws
after applying the locktight.
NOTE: Be sure to apply the locktight to the screws specified in the figure.
?
3. Install the display cover and secure it with the following screws.
?
QOSMIO F10 Maintenance Manual (960-498)
M2.5? 4B FLAT BIND screw
M2.5? 6B FLAT BIND screw
(Locktight)
M2.5? 6 PSP TIGHT screw
4.25 Hinge
x2
x2
x4
4-69