Toshiba QOSMIO F10 Maintenance Manual page 260

Personal computer

Hide thumbs Also See for QOSMIO F10:

Table of Contents

4.8 Display assembly

5. Disconnect the LCD harness from the connector PJ5600 on the system board.

6. Unlock the connector CN3201 and disconnect the touch pad cable from the

connector on the system board.

7. Unlock the connector CN9550 and disconnect the SJ board flat cable from the

connector on the sound board.

8. Take out the wireless LAN antenna cables under the insulators and pull out it from

the upper side of the slot.

Touch pad cable

Figure 4-16 Removing the cables

4 Replacement Procedures

Upper side of the slot

SJ board flat cable

QOSMIO F10 Maintenance Manual (960-498)

Chapters

Table of Contents