Toshiba QOSMIO F10 Maintenance Manual page 219

3 Tests and Diagnostics
(a) Power On Display
This option is used to select the display when booting up.
Auto-Selected
LCD+AnalogRGB
NOTE: When starting the computer in Standby or hibernation mode, the last
configuration is remembered. If data does not appear on the display you are using
after starting in Standby or hibernation mode, pressing Fn+F5.
Pressing Fn+F5 changes the display setting as follows in order: the internal
LCD, the external monitor, both the internal LCD and the external monitor and
TV display.
You cannot select TV display in HW Setup. To display on a TV screen, use
Fn+F5.
When an external monitor, which does not support SVGA mode is connected and
"LCD+AnalogRGB" is selected, the external display is not displayed.
(b) LCD Display Stretch
When LCD Display Stretch is enabled, it is possible to stretch the picture in small
resolution mode.
Enabled
Disabled
(c) TV Type
This option allows you to select the type of TV.
NTSC (Japan)
NTSC (US)
PAL (S-Video)
525p (480p,D2)
750p (720p,D4)
1125i (1080i,D3)
525i (480i,D1)
PAL (SCART)
QOSMIO F10 Maintenance Manual (960-498)
Selects an external monitor if one is connected. Otherwise it
selects the internal LCD. (Default)
Selects both the internal LCD and the external monitor for
simultaneous display.
Enables the LCD display stretch feature. (Default)
Disables the LCD display stretch feature.
TV in Japanese system
TV in the U.S. system
TV in Europe and China system
High Definition Television with 480 progressive scan
High Definition Television with 720 progressive scan
High Definition Television with 1080 interlace
High Definition Television with 480 interlace
TV in Europe system
3.31 SETUP
3-99