4 Replacement Procedures
4.20
Touch pad
Removing the touch pad
The following describes the procedure for removing the touch pad (See Figure 4-36).
1. Remove the glass tape fixing the touch pad flexible cable.
2. Disconnect the touch pad flat cable from the touch pad.
3. Remove the following screws fixing the touch pad plate and remove the touch pad
plate.
?
4. Remove the following screws securing the touch pad.
?
5. Peel off touch pad to remove.
Glass tape
M2.5x2.8B FLAT BIND
M2.5x2.8B FLAT BIND
QOSMIO F10 Maintenance Manual (960-498)
M2.5? 2.8B
FLAT BIND screw
M2.5? 2.8B
FLAT BIND screw
Figure 4-36 Removing the touch pad
x4
x2
M2.5x2.8B FLAT BIND
Touch pad flat cable
M2.5x2.8B FLAT BIND
Touch pad
4.20 Touch pad
4-53