Toshiba QOSMIO F10 Maintenance Manual page 218

3.31 SETUP
4. Password
This option sets or resets the user password for power on and instant security (Fn+F1).
Registered
Not registered
For details on setting the user password, refer to the User's Manual.
5. Boot Priority
(a) Boot Priority
Use this option to set the priority for booting of the computer and the priority for the
HDD for booting.
FDD? HDD? CD-ROM? LAN: The computer looks for bootable files in the
HDD? CD-ROM? LAN? FDD: The computer looks for bootable files in the
FDD? CD-ROM? LAN? HDD: The computer looks for bootable files in the
CD-ROM? LAN? HDD? FDD: The computer looks for bootable files in the
CD-ROM? LAN? FDD? HDD: The computer looks for bootable files in the
HDD? FDD? CD-ROM? LAN: The computer looks for bootable files in the
(*1) CD-ROM refers to an Optical Disk Drive.
(b) Network Boot Protocol
Use this option to set the starting method via a network.
PXE
RPL Sets to RPL protocol.
6. Display
This group of options configures the computer's display.
3-98
The user password has been registered.
The user password has not been registered.
Sets to PXE protocol. (Default)
3 Tests and Diagnostics
following order: FDD, HDD, CD-ROM
(*1) and LAN
following order: HDD, CD-ROM, LAN
and FDD.
following order: FDD, CD-ROM, LAN
and HDD.
following order: CD-ROM, LAN, HDD
and FDD.
following order: CD-ROM, LAN, FDD
and HDD.
following order: HDD, FDD, CD-ROM
and LAN. (Default)
QOSMIO F10 Maintenance Manual (960-498)