Toshiba QOSMIO F10 Maintenance Manual page 298

4.24 Wireless antennas/ LCD harness
2. Remove the following screw securing the LCD harness holder and remove the LCD
harness holder (middle frame side).
?
3. Remove the LCD harness from the guide.
LCD harness holder
Figure 4-46
Installing the LCD harness
The following describes the procedure for installing the LCD harness (See Figure 4-45 and 4-
46).
1. Arrange the LCD harness to the guide.
2. Install the LCD harness holder (middle frame side) and secure it with the following
screw.
?
3. Attach the LCD harness holder (display cover side) and secure it with the following
screw.
?
4-66
M2.5? 2.8B FLAT BIND screw
Removing the LCD harness holder (middle frame side)
M2.5? 2.8B FLAT BIND screw
M2.5? 4B FLAT BIND screw
4 Replacement Procedures
M2.5x2.8B FLAT BIND
QOSMIO F10 Maintenance Manual (960-498)
x1
LCD harness
x1
x1