Hdd - Toshiba QOSMIO F10 Maintenance Manual

Personal computer

Hide thumbs Also See for QOSMIO F10:

Table of Contents

4.3 HDD

Removing the HDD

The following describes the procedure for removing the HDD (See Figure 4-4 and 4-5).

CAUTION: Be careful not to drop or leave screws in the PC.

Take care not to press on the top or bottom of the HDD. Pressure may cause

data loss or damage to the device.

1. Turn the computer upside down.

2. Remove the following screw fixing the HDD slot cover and remove the HDD slot

3. Hold the tab and pull out the HDD assembly from the connector CN1800 on the

system board.

FLAT BIND screw

HDD slot cover

Figure 4-4 Removing the HDD assembly

4 Replacement Procedures

M2.5x10B FLAT BIND

QOSMIO F10 Maintenance Manual (960-498)

HDD assembly

Table of Contents