Toshiba QOSMIO F10 Maintenance Manual page 222

3.31 SETUP
Mode 1
Mode 2
Mode 3
(h) Language During Bootup
This option selects the language during bootup. This message appears only on the
model for TCL (Canada).
English
French
8. Configuration
This option lets you set the device configuration.
All Devices
Setup by OS
NOTE: When using installed OS, selecting "Set by OS" is recommended. But when
executing test programs, select "ALL Devices".
9. Drives I/O
This option displays the address and interrupt level for hard disk drive and optical disk
drive. It is for information only and cannot be changed.
Built-in HDD
CD-ROM
10. PCI Bus
3-102
Sets to Mode1. (Default)
Glows blue (Power ON) / Glows yellow (Standby) / Glows
orange (Power OFF/Hibernation)
Sets to Mode 2.
Glows blue (Power ON) / Alternately flashes green and orange
(Standby) / Alternately flashes green and blue (Power
OFF/Hibernation)
Sets to Mode 3.
Flashes in order of green, orange and blue (Power ON) /
Glows yellow (Standby) / Glows orange (Power OFF
/Hibernation)
The message is displayed in English. (Default)
The message is displayed in French.
BIOS sets all devices.
Initializes devices, which is needed to load an operating
system. Operating system initializes other devices.
This cannot be changed.
This cannot be changed. This is not displayed when a drive
is not built-in.
3 Tests and Diagnostics
QOSMIO F10 Maintenance Manual (960-498)